Thursday, August 18, 2011

DeVILBISS HVLP FinishLine® 3 VALUE SPRAY GUN KIT with 1.3, 1.5 and 1.8mm Fluid Tips and Air Valve Regulator w-Gauge Includes 1 Liter Aluminum Cup with Lid

Listprice
Lowest Price : $169.96

You Save : Compare Prices With Sellers
Available From 1 Sellers

Prices Maybe Change without Prior notice So Click to Check Update Prices Please.

DeVILBISS HVLP FinishLine® 3 VALUE SPRAY GUN KIT with 1.3, 1.5 and 1.8mm Fluid Tips and Air Valve Regulator w-Gauge Includes 1 Liter Aluminum Cup with Lid
>>>> Only
$169.96 Best Buy New and Improved Features of the FinishLine 3: Gun Body is anodized blue inside and out, making it ideal for solvent based paints and waterborne compatable when used a with plastic cup. The new anodizing also makes it easier to clean
The included 1.3, 1.5, and 1.8mm Fluid Tips will allow you to spray a wide spectrum of coatings! You'll be able to Achieve Professional Spraying
The FinishLine 3 is used in Multiple Industries such as Automotive, Industrial, Marine and Wood Working! It can be used with a 3 HP compressor, and 23 psi inlet pressure yields 10 psi at the cap.

  • Multiple fluid tips included
  • High grade stainless steel parts.
  • High grade stainless steel needle & nozzle
  • The new anodizing also makes it easier to clean
  • Performance with Basecoats, Clearcoats, Single Stage, Sealers, 2K Primers and More

  • Eastwood Tinning Butter - Leading / Body Solder Repairs

    3M 03076 3-2/3" x 9" 60 Grit Premium Automotive Sandpaper Sheet

    Hutchins 3800 Orbital Action Long Board Air Sander

    Hitachi SP18VA 7-Inch Sander/Polisher

    Listprice $372.18
    Lowest Price : $229.99

    You Save : Compare Prices With Sellers
    Available From 2 Sellers

    Prices Maybe Change without Prior notice So Click to Check Update Prices Please.

    Hitachi SP18VA 7-Inch Sander/Polisher
    >>>> Only
    $229.99 Best Buy This 7-inch Sander Polisher features a powerful 11 amp motor, heat resistant bearing chamber and iron ball bearings, it's equiped with three electronic control devices - constant speed control, soft start, and two way variable speed controls located on both the trigger and dial, efficent loop - handle design, lightweight - only 6.2 pounds, and variable speed control from 0 to 3,400 rpm.

  • 7" Pads
  • Sander/Polisher
  • 11 Amp
  • EVS 0-3400 rpm
  • Hitachi exclusive 5 year warranty

  • .8mm MINI GRAVITY FEED SPRAY GUN WITH .5mm & 1.0mm TIPS & Side Mounted CUP

    Listprice
    Lowest Price : $29.99

    You Save : Compare Prices With Sellers
    Available From 1 Sellers

    Prices Maybe Change without Prior notice So Click to Check Update Prices Please.

    .8mm MINI GRAVITY FEED SPRAY GUN WITH .5mm & 1.0mm TIPS & Side Mounted CUP
    >>>> Only
    $29.99 Best Buy This Gun provides a minimum amount of overspray, making it excellent for situations where an Automotive Touch-Up Spray Gun would normally be used. It's commonly used by Auto Painters, Hobbyist and Artists for Paint Chip Repairs, Signs, Backgrounds, Murals, Etc... Air Inlet: 1/4" Air Pressure: 30-60 PSI (2.0-4.0bar) Air Consumption: 2.5-6.0 CFM Cup: 7 Ounces (200 ml) Aluminum Gravity Feed Side Mount Nozzle Atomizing Sets in sizes: 0.5mm, 0.8mm & 1.0mm

  • Miniature "Pistol Grip" Spray Gun Includes 3 Fluid Atomizing Nozzle Sets in Sizes 0.5mm, 0.8mm & 1.0
  • Allows this Miniature Spray Gun to perform as a Touch-Up & Detail Spray Gun with the 0.8 & 1.0 tips
  • This Multi-Purpose Miniature Spray Gun is well suited for uses demanding precise control of spray
  • The 7 ounce gravity cup is side-mounted and rotates, allowing you to spray horizontally& vertically
  • This Gun provides a minimum amount of overspray

  • Kustom Shop 1725 BODY FILLER MIXING BOARD WITH PLASTIC SPREADERS

    Front Fender Finisher Forming & Lip Roller Rolling Tool

    Listprice
    Lowest Price : $49.12

    You Save : Compare Prices With Sellers
    Available From 2 Sellers

    Prices Maybe Change without Prior notice So Click to Check Update Prices Please.

    Front Fender Finisher Forming & Lip Roller Rolling Tool
    >>>> Only
    $49.12 Best Buy If you're installing a large wheel/tire combo, lowering the front end, or simply looking to gently alter that factory edge on the wheel openings for a more custom look, this is the easiest way to do it. You can complete the job in under 30 minutes, right in your driveway or garage, since there's no need to remove the wheels and tires, and no need for a lift.


    SG Tool Aid 81400 Dent Puller and Slide Hammer

    Listprice $34.95
    Lowest Price : $19.18

    You Save : $13.48 Compare Prices With Sellers
    Available From 13 Sellers

    Prices Maybe Change without Prior notice So Click to Check Update Prices Please.

    SG Tool Aid 81400 Dent Puller and Slide Hammer
    >>>> Only
    $19.18 Best Buy The largest selling and most economical body shop dent puller in the industry. The 3 lb. slide weight is mounted on 1/2" plated steel shaft. Famous blue vinyl hand grip over steel handle reduces sting on technicians hands and provides 100 percent grip. There's no sacrifice, comfort, quality and durability!

  • Broached hex in nose cone locks pulling screw in place, ends breakage
  • Supplied with two hardened pulling screws and "L" puller hook fabricated of aircraft quality steel
  • Nose cone and shaft threads are 1/2"-20
  • Dent puller and 3lb. slide hammer

  • Fiberglass Rust Brush Detail Prep & Cleaning Tool

    Listprice
    Lowest Price : $10.92

    You Save : Compare Prices With Sellers
    Available From 2 Sellers

    Prices Maybe Change without Prior notice So Click to Check Update Prices Please.

    Fiberglass Rust Brush Detail Prep & Cleaning Tool
    >>>> Only
    $10.92 Best Buy

    Brush Away Rust. Rust Brush has a tough fiberglass core that quickly and easily removes rust and dirt from chips and scratches. Essential before painting.

    • Cleans away wax, road film & rust.
    • Cleans & prepares an area for soldering. Cleans electrical connections, contacts, cable ends and tools.
    • Cleans & prepares any Metal surface for painting, gluing & any other type of restoration.
    • Cleans rivets and screws.
    • Excellent For Spot Sanding and Paint Chip Repairs.
    • If you have ever had trouble with paint chipping or flaking off after masking off and painting graphics, this tool will be a big help. You can scuff up the paint surface right up to the masking tape. No shiny surface will show. You get a much sharper edge and paint adherence.

    The Detail Prep tool gets into the smallest areas to completely clean the designated area. Color of tool varies.



    Starting Line HVLP Mini Spray Gun - 1.0mm Tip

    Listprice $105.79
    Lowest Price : $65.00

    You Save : Compare Prices With Sellers
    Available From 8 Sellers

    Prices Maybe Change without Prior notice So Click to Check Update Prices Please.

    Starting Line HVLP Mini Spray Gun - 1.0mm Tip
    >>>> Only
    $65.00 Best Buy
  • Value priced mini HVLP detail gun

  • 1.0mm fluid tip is suitable for a spraying a variety of materials.

  • Includes cleaning brush and wrench

  • 30 PSI inlet pressure delivers 10 PSI at the air cap; 8 CFM air consumption.

  • Comes with Devilbiss 1 Year Limited Warranty

  • StartingLine Detail and Touch-Up HVLP Gravity Spray Gun
  • Includes 1 Year Limited Warranty
  • 1 Mini-Size Touch-Up STARTINGLINE HVLP Gravity Feed Spray Gun with a 1.0mm Fluid Tip and a 8.5 oz Me
  • This 1.0mm set-up is suitable for Spot Repairs using a variety of Coatings
  • Comes with Cleaning Brush and Maintenance Wrench

  • Makita 9227CY 7-Inch Variable Speed Electronic Sander/Polisher

    Listprice $348.00
    Lowest Price : $195.99

    You Save : $152.01 Compare Prices With Sellers
    Available From 9 Sellers

    Prices Maybe Change without Prior notice So Click to Check Update Prices Please.

    Makita 9227CY 7-Inch Variable Speed Electronic Sander/Polisher
    >>>> Only
    $195.99 Best Buy This Makita polisher is fast and powerful for clear coat finishes, and fantastic for ultra-slow polishing, too. Its variable speed feature with a preset maximum speed dial (from 600 to 3,000 rpm) gives you maximum control for buffing applications. The electronic speed control maintains constant speed under load; and best of all, this tool converts from polisher to sander in a snap. For continuous use at one speed, just click the lock-on button and you're ready to sand for hours. The 9227CY comes with a sanding disc, rubber pad, lock nut, lock nut wrench, and side handle -- though this model is also shown with optional buffing bonnet (not included).

  • 7-inch electronic variable speed polisher with an integrated side handle for horizontal work
  • Pre-set speed setting dial (from 600-3,000 RPM) for maximum control; electronic speed control maintains constant speed under load
  • Easily converts to a sander; lock-on button for continuous use at 1 speed; 3-prong plug
  • Includes sanding disc, rubber pad, lock nut, lock nut wrench, and side handle
  • Tool weighs 6.6 pounds; 1-year manufacturer's warranty

  • TEKTON 5888 Mechanic's Stethoscope

    Listprice $17.99
    Lowest Price : $6.99

    You Save : $9.89 Compare Prices With Sellers
    Available From 3 Sellers

    Prices Maybe Change without Prior notice So Click to Check Update Prices Please.

    TEKTON 5888 Mechanic's Stethoscope
    >>>> Only
    $6.99 Best Buy MIT MECHANIC'S STETHOSCOPE features: Sensitive Probe Connects to a Shockproof Handle and Reaches 11-3/4", Helps to Locate Trouble Spots within the Engine Block, Vinyl Tubing Connects to Sensitive Ear Piece, 1-pc. Mechanics Stethoscope, 1-pc. Probe Extension

  • Comfortable, Spring-Return Ear Pieces Stay in Place
  • Aluminum and Flexible Vinyl Tubing Construction
  • 4-Inch Steel Probe with 8-Inch Extension
  • Locate Trouble Spots within Engine Block
  • Quality Guarantee

  • Code by : paid web directory